[PDF] Vector Control Of Ac Drives Book Full Download (2023)

Book Synopsis Vector Control and Dynamics of AC Drives by : D. W. Novotny

Download or read book Vector Control and Dynamics of AC Drives written by D. W. Novotny and published by Oxford University Press. This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed but easily understood development of the complex variable form of the equations describing AC machines. These equations are then extended to incorporate inverter models and a number of examples of inverter-machine dynamics are presented. A section on constantspeed behaviour includes development of the conventional equivalent circuits and an extensive treatment of the constant speed eigenvalues and switching transients.Vector control and field orientation concepts are first introduced in terms of their steady state properties. This allows anyone with a basic understanding of steady state machine behaviour to understand and appreciate the potential of field orientation and to actually start using the bookimmediately. This is followed by a full dynamic analysis of vector controlled systems including conventional indirect and direct field orientation and less conventional systems that orient to air gap or stator flux rather than rotor flux. A chapter on the important types of current regulators isalso included.The final two chapters deal with vector control and field orientation system performance in relation to tuning errors, saturation effects, selection of flux levels to optimize performance and the question of optimization in the field weakening mode.

Book Synopsis Vector Control of AC Drives by : SyedA. Nasar

Download or read book Vector Control of AC Drives written by SyedA. Nasar and published by Routledge. This book was released on 2017-11-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternating current (AC) induction and synchronous machines are frequently used in variable speed drives with applications ranging from computer peripherals, robotics, and machine tools to railway traction, ship propulsion, and rolling mills. The notable impact of vector control of AC drives on most traditional and new technologies, the multitude of practical configurations proposed, and the absence of books treating this subject as a whole with a unified approach were the driving forces behind the creation of this book. Vector Control of AC Drives examines the remarkable progress achieved worldwide in vector control from its introduction in 1969 to the current technology. The book unifies the treatment of vector control of induction and synchronous motor drives using the concepts of general flux orientation and the feed-forward (indirect) and feedback (direct) voltage and current vector control. The concept of torque vector control is also introduced and applied to all AC motors. AC models for drive applications developed in complex variables (space phasors), both for induction and synchronous motors, are used throughout the book. Numerous practical implementations of vector control are described in considerable detail, followed by representative digital simulations and test results taken from the recent literature. Vector Control of AC Drives will be a welcome addition to the reference collections of electrical and mechanical engineers involved with machine and system design.

Book Synopsis High Performance AC Drives by : Mukhtar Ahmad

Download or read book High Performance AC Drives written by Mukhtar Ahmad and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variable speed is one of the important requirements in most of the electric drives. Earlier dc motors were the only drives that were used in industries requiring - eration over a wide range of speed with step less variation, or requiring fine ac- racy of speed control. Such drives are known as high performance drives. AC - tors because of being highly coupled non-linear devices can not provide fast dynamic response with normal controls. However, recently, because of ready availability of power electronic devices, and digital signal processors ac motors are beginning to be used for high performance drives. Field oriented control or vector control has made a fundamental change with regard to dynamic perfo- ance of ac machines. Vector control makes it possible to control induction or s- chronous motor in a manner similar to control scheme used for the separately - cited dc motor. Recent advances in artificial intelligence techniques have also contributed in the improvement in performance of electric drives. This book presents a comprehensive view of high performance ac drives. It may be considered as both a text book for graduate students and as an up-to-date monograph. It may also be used by R & D professionals involved in the impro- ment of performance of drives in the industries. The book will also be beneficial to the researchers pursuing work on sensorless and direct torque control of electric drives as up-to date references in these topics are provided.

Book Synopsis Vector Control of AC Drives by : S. A. Nasar

Download or read book Vector Control of AC Drives written by S. A. Nasar and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Alternating current (AC) induction and synchronous machines are frequently used in variable speed drives with applications ranging from computer peripherals, robotics, and machine tools to railway traction, ship propulsion, and rolling mills. The notable impact of vector control of AC drives on most traditional and new technologies, the multitude of practical configurations proposed, and the absence of books treating this subject as a whole with a unified approach were the driving forces behind the creation of this book. Vector Control of AC Drives examines the remarkable progress achieved worldwide in vector control from its introduction in 1969 to the current technology. The book unifies the treatment of vector control of induction and synchronous motor drives using the concepts of general flux orientation and the feed-forward (indirect) and feedback (direct) voltage and current vector control. The concept of torque vector control is also introduced and applied to all AC motors. AC models for drive applications developed in complex variables (space phasors), both for induction and synchronous motors, are used throughout the book. Numerous practical implementations of vector control are described in considerable detail, followed by representative digital simulations and test results taken from the recent literature.Vector Control of AC Drives will be a welcome addition to the reference collections of electrical and mechanical engineers involved with machine and system design."--Provided by publisher.

Book Synopsis Vector Control of Three-Phase AC Machines by : Nguyen Phung Quang

Download or read book Vector Control of Three-Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.

Book Synopsis Vector Control of AC Drives by :

Download or read book Vector Control of AC Drives written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synopsis High Performance Control of AC Drives with Matlab/Simulink by : Haitham Abu-Rub

Download or read book High Performance Control of AC Drives with Matlab/Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.

Book Synopsis Vector Control of Ac Drives by : Árpád Kelemen

Download or read book Vector Control of Ac Drives written by Árpád Kelemen and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synopsis High Performance Control of AC Drives with Matlab / Simulink Models by : Haitham Abu-Rub

Download or read book High Performance Control of AC Drives with Matlab / Simulink Models written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2012-04-13 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to understanding AC machines with exhaustive simulation models to practice design and control Nearly seventy percent of the electricity generated worldwide is used by electrical motors. Worldwide, huge research efforts are being made to develop commercially viable three- and multi-phase motor drive systems that are economically and technically feasible. Focusing on the most popular AC machines used in industry – induction machine and permanent magnet synchronous machine – this book illustrates advanced control techniques and topologies in practice and recently deployed. Examples are drawn from important techniques including Vector Control, Direct Torque Control, Nonlinear Control, Predictive Control, multi-phase drives and multilevel inverters. Key features include: systematic coverage of the advanced concepts of AC motor drives with and without output filter; discussion on the modelling, analysis and control of three- and multi-phase AC machine drives, including the recently developed multi-phase-phase drive system and double fed induction machine; description of model predictive control applied to power converters and AC drives, illustrated together with their simulation models; end-of-chapter questions, with answers and PowerPoint slides available on the companion website www.wiley.com/go/aburub_control This book integrates a diverse range of topics into one useful volume, including most the latest developments. It provides an effective guideline for students and professionals on many vital electric drives aspects. It is an advanced textbook for final year undergraduate and graduate students, and researchers in power electronics, electric drives and motor control. It is also a handy tool for specialists and practicing engineers wanting to develop and verify their own algorithms and techniques.

Book Synopsis Vector-control AC Drives by :

Download or read book Vector-control AC Drives written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synopsis Vector-control AC Drives. Instructor Guide by : Lab-Volt (Québec) Ltd

Download or read book Vector-control AC Drives. Instructor Guide written by Lab-Volt (Québec) Ltd and published by [Charlesbourg, Quebec] : Lab-Volt. This book was released on 2000 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synopsis The Field Orientation Principle in Control of Induction Motors by : Andrzej Trzynadlowski

Download or read book The Field Orientation Principle in Control of Induction Motors written by Andrzej Trzynadlowski and published by Springer Science & Business Media. This book was released on 1993-12-31 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Field Orientation Principle (FOP) constitutes a fundamental concept behind the modern technology of high-performance, vector-controlled drive systems with AC motors. The recent intense interest in these systems has been spawned by the widespread transition from DC to AC drives in industry. Induction motors, industry's traditional workhorses, are particularly well suited for FOP-based vector control. The Field Orientation Principle in Control of Induction Motors presents the FOP in a simple, easy-to-understand framework based on the space-vector dynamic model of the induction machine. Relationships between the classic phasor equivalent circuits of the motor and their vector counterparts are highlighted. A step-by-step derivation of dynamic equations of the motor provides a formal background for explanation of the basic approaches to vector control. In addition, the author presents scalar control methods for low-performance drives as an intermediate stage between uncontrolled and high-performance drives. The reader will also find a full chapter devoted to power inverters, which constitute an important component of adjustable speed AC drive systems, and a review of associated issues such as observers of motor variables, parameter estimation, adaptive tuning, and principles of the position and speed control of field-oriented induction motors. With a wealth of numerical examples and computer simulations illustrating the ideas and techniques discussed and an extensive bibliography, The Field Orientation Principle in Control of Induction Motors is a practical resource and valuable reference for researchers and students interested in motor control, power and industrial electronics, and control theory.

Book Synopsis Practical Variable Speed Drives and Power Electronics by : Malcolm Barnes

Download or read book Practical Variable Speed Drives and Power Electronics written by Malcolm Barnes and published by Newnes. This book was released on 2003-07-30 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variable frequency drive - VFD - frequency drives - reductiemotor.

Book Synopsis Vector-Control AC Drives by : Lab-Volt (Quebec) Ltd

Download or read book Vector-Control AC Drives written by Lab-Volt (Quebec) Ltd and published by . This book was released on 2006-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synopsis DSP-Based Electromechanical Motion Control by : Hamid A. Toliyat

Download or read book DSP-Based Electromechanical Motion Control written by Hamid A. Toliyat and published by CRC Press. This book was released on 2003-09-29 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the programming and use of a Digital Signal Processor (DSP) may not be the most complex process, utilizing DSPs in applications such as motor control can be extremely challenging for the first-time user. DSP-Based Electromechanical Motion Control provides a general application guide for students and engineers who want to implement DSP-base

Book Synopsis Sensorless Vector and Direct Torque Control by : Peter Vas

Download or read book Sensorless Vector and Direct Torque Control written by Peter Vas and published by Oxford, [Eng.] ; New York : Oxford University Press. This book was released on 1998 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years vector-controlled AC drives have taken over from more conventional DC drives. Applications are found everywhere including machine tools, robotics, electric traction, and computer peripherals. This book examines sensorless vector-controlled drives and direct torque controlled drives. It builds on the author's popular Vector Control of AC Drives and brings the subject fully up to date.

Book Synopsis Vector Control of AC Machines by : Peter Vas

Download or read book Vector Control of AC Machines written by Peter Vas and published by Oxford University Press, USA. This book was released on 1990 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vector control has become a powerful and frequently adopted technique in recent years. This book discusses in detail the various forms of vector control of smooth-air-gap and salient-pole electrical machines supplied by impressed stator voltages or currents or impressed rotary currents.